Serving the Virginia Beach area  ·  (757) 821-6340  ·  Open Mon-Sun 7am-7pm
📞 (757) 821-6340 Free Quote

Metal Roofing in Newport News, VA (23606) · Local Professionals

Virginia Beach Metal Roofing · Fast response in Newport News and the Virginia Beach area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Newport News runs on water. From the James River shoreline in Hilton Village and Christopher Newport University's campus to the deep-water marinas off Deep Creek and the quiet 1960s brick ranches near Todd Stadium, this city's housing stock sits low, flat, and close to the tide. That means salt air, wind-driven rain, and summer thunderstorms that find every loose fastener on an old shingle roof.

Homeowners in ZIP 23606 call Virginia Beach Metal Roofing because we've been solving those exact problems since 2009. Whether you're in a waterfront home off Riverside Drive or a split-level in Denbigh, we know how metal performs in Hampton Roads humidity and nor'easter wind, and we quote the job honestly before we ever climb the ladder.

Metal Roofing in Newport News (23606)

Newport News sits on a low coastal plain where the water table is high and the soil is sandy in places, so roof drainage and flashing details matter more than they would inland. Waterfront properties along the James River and the Warwick River take constant damp salt air, which eats at fasteners and accelerates corrosion on cheap panels. Older neighborhoods like Hilton Village and the streets around CNU have tighter lots, mature oaks, and steep pitches that make material staging and ladder access a real planning exercise. Out in Denbigh and the Beechmont area, 1950s and 1960s ranches often have layered shingles that need to be stripped or assessed for a metal-over-shingle retrofit. And anywhere near the shipyard and downtown, wind off the water during nor'easters can lift panel edges if the fastening pattern isn't right. We plan every Newport News job around those realities, not a generic checklist.

Our team has served Newport News and the greater Virginia Beach area since 2009, and we're a Metal Roofing Alliance member. We're fully insured with general liability and workers' compensation, and we handle everything from standing seam installation to leak repair and re-fastening.

Our services in Newport News

How a Job Works in Newport News

Step 1: You call (757) 821-6340 or request a free estimate online. We schedule an on-site assessment at your Newport News property, walk the roof, check the decking and flashing, and talk through panel profiles and colors that fit your home and your budget. You get a written scope before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the city and coordinate any HOA or historic district review if your neighborhood requires it. On tight lots in Hilton Village or near CNU, we stage materials carefully and protect landscaping. Installation timing depends on weather and inspection scheduling, and we keep you posted.

Step 3: We clean up completely, haul away old materials, and do a final walkthrough with you. We don't leave until you've seen the finished roof, the flashing details, and the cleanup. Your property is left clean.

Pricing in Newport News depends on roof size, pitch, access, and condition, but here are realistic starting points. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal-over-shingle retrofit at $7. Corrugated and ribbed panel roofing starts at $5.50, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Storm damage inspections are free. The biggest cost factors are square footage, how many layers need to come off, tight lot access, and urgency after a storm. Call (757) 821-6340 for a free estimate tailored to your Newport News home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Newport News and nearby areas.

My 1960s ranch near Todd Stadium has two layers of shingles. Can you install metal over them?
Sometimes, yes, but code limits how many existing layers you can recover over, and the decking has to be sound. We inspect the shingles and decking first, then tell you whether a retrofit or a full tear-off is the right call for your Newport News home.
A nor'easter peeled back panels on my roof off Riverside Drive. How fast can you respond?
We prioritize active leaks and wind damage in Newport News. Call (757) 821-6340 and we'll schedule a free storm damage inspection, tarp or secure the roof if needed, and give you a repair scope. Response time depends on storm volume, but we move quickly on anything letting water in.
What does a typical metal roof replacement cost in Newport News?
Most full replacements start around $9 per square foot, with standing seam at $10 and up. A 1,500 square foot roof often lands in the low five figures depending on pitch, access, and whether old layers need removal. We give you a written estimate after seeing the roof.
Do I need a permit for a metal roof in Newport News?
Yes, a roofing permit is commonly required for a full replacement or re-roof, and inspection requirements apply. Rules and fees vary, so check the City of Newport News website at https://www.nnva.gov or call the building department to confirm what your project needs before work begins.
My HOA requires a specific roof color. Can you help with approval?
We work with HOA design review in Newport News regularly. We can provide panel profile and color samples, manufacturer spec sheets, and installation details your HOA or historic district review may request. We coordinate the paperwork so approval doesn't hold up your project.
Are you insured for work on my Newport News property?
Yes. We carry general liability and workers' compensation coverage, and we're happy to provide proof of insurance before we start. That protects you if anything goes wrong on your property.
What maintenance does a metal roof need in Newport News's humid climate?
Check fasteners annually, especially on waterfront homes where salt air speeds corrosion. Clear debris from valleys and gutters before hurricane season, and have flashing at chimneys and skylights inspected every few years. We offer inspections and re-fastening starting at $750.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Virginia Beach

All your work handled by qualified professionals in Virginia Beach

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Virginia Beach

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Virginia Beach · Response within 24h · No commitment · ☎ (757) 821-6340

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Virginia Beach ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm